Design Tool
- 1: Switch Basics.
- 1.1: Panel Mounted section - Terminology.
- 1.2: Enclosure types.
- 1.3: Technical information.
- 1.4: Assembly instructions.
- 1.5: Piezo Switches.
- 1.5.1: Construction.
- 1.5.2: Application hints and typical circuits.
- 2: Typical Applications.
Check Availability of our Stock ProductsAssembly instructions
When assembling contact blocks the minimum panel cut-outs must be adjusted to the dimensions.
Assembly instructions for switches with concealed plastic bezel for mimic diagrams
This bezel type has been designed especially for mimic diagrams (for example mosaic panels).
Please respect by all means the assembly instructions on the respective catalog pages.
|
|
Turn the slot of thered locking pin parallel to the dovetail of the switch body and slide the contact block onto the dovetail. | When the switch ist in "off" position the contact block must be pushed firmly into position and held there. Secure by turning the red locking pin a quarter turn in an clockwise direction with a suitable screwdriver. |